Senior Network Hand & Feet Engineer

Immediate need for a talented Senior Network Hand & Feet Engineer. This is a 12 Months contract opportunity with long-term potential and is located in Boston, MA (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID: 26-01195

Pay Range: $30 - $35/hour.  Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Advanced Device Racking & Mounting
• Precision Placement: Interpret and execute Rack Elevation Diagrams (REDs) to mount high-density chassis (Cisco Nexus 9k, Catalyst 9500) and 1U/2U appliances.
• Mechanical Safety: Ensure proper use of rack rails, cage nuts, and stabilization kits. Manage weight distribution to maintain rack integrity.
• Power Sequencing: Connect dual-homed power supplies to diverse PDU sources (A B feeds) and perform "pull tests" to verify seating.
• Structured Cabling & Fiber Management
• Fiber Optics: Expert-level handling of Single Mode (SMF) and Multi-Mode (MMF) fiber. Proficiency in cleaning connectors (IBC cleaners) and inspecting end-faces with fiber scopes.
• SFP/Transceiver Management: Correctly identify and install SFP, SFP , QSFP , and QSFP28 modules. Troubleshoot "link down" issues by verifying wavelength compatibility (e.g., 850nm vs 1310nm) and light levels.
• Patching & Labeling: Execute high-density patching in accordance with ANSI/TIA-606-B standards. Ensure every cable is labeled at both ends with Near-End/Far-End information.
• Patch Panels & Cross-Connects
• Circuit Extensions: Coordinate with Telco providers to extend circuits from the Meet-Me-Room (MMR) to the local rack via cross-connects.
• Patch Panel Termination: Manage copper (RJ45) and fiber (LC/SC/MPO) patch panels. Perform "light-checks" using Visual Fault Locators (VFL) to trace paths through multiple patches.
• Media Conversion: Deploy and troubleshoot media converters or transceivers when transitioning between different physical media types.
• Remote Management & Console Access
• Out-of-Band (OOB) Setup: Configure and cable Terminal Servers (e.g., Opengear, Lantronix, or Cisco ISR) to provide permanent remote console access to all managed devices.
• Serial Connectivity: Troubleshoot baud rate mismatches, roll-over cables, and DB9-to-RJ45 adapters to ensure the NOC has a reliable "backdoor" during outages.
• Local Support: Be prepared to connect locally via laptop and serial-to-USB adapters to provide a "live stream" of boot sequences or BIOS-level troubleshooting.
• Advanced Routing & Switching Knowledge
• L1 Fundamentals : Strong working knowledge in ethernet , Gigabit Ethernet, Serial , fiber cabling, transceivers (Arista, Cisco SFP , QSFP ), SFP, PIC, NIM, HA ports, power supplies, patching and troubleshooting, with knowledge of DWDM and experience in handling 10/20/40 Gig Fiber links
• L2 Fundamentals: Configure and troubleshoot VLANs, VTP, and Spanning Tree Protocol (STP), Port mirroring, packet captures. Must understand how to identify and resolve broadcast storms or physical loops at the rack level.
• L3 Fundamentals: Assist in the bring-up of Layer 3 interfaces (SVIs and Routed Ports). Basic knowledge of prefix lengths and IP addressing to verify gateway connectivity.
• Protocol Verification: Use CLI commands to verify BGP and OSPF neighbor adjacencies after physical circuit hand-offs or cross-connect installations.
• EtherChannel/LACP: Provision and troubleshoot Link Aggregation Groups (LAGs). Ensure that physical cabling matches the logical member-port configuration on the switch.

Key Requirements and Technology Experience: 

• Key skills; Cisco Palo Alto, Ethernet , Fiber Cabling
• Cisco Palo Alto and F5
• Ethernet and Fiber Cabling
• Layer 1(Physical Cabling) and Layer 2 (Network Connectivity) Troubleshooting
• Experience: 6–8 years in a Data Center or large Enterprise campus environment.
• Ethernet, Fiber cabling, Hardware : Experience in installation of ethernet, fiber cabling on Cisco, Arista and Palo Alto, F5 load balancers and its associated components like SFP, PIC, NIM, DPC
• Routing and Switching: Ability to navigate Cisco IOS, NX-OS, PAN OS or Arista EOS to perform show commands and basic interface configurations.
• Tools: Proficiency with Visual Fault Locators (VFL), Light Meters, and Fiber Inspection Scopes.
• Certifications: CCNA or equivalent is mandatory; CCNP Enterprise (ENCORE) is highly preferred to demonstrate routing and switching proficiency.
• Experience in handling mission critical network incidents/problems in Enterprise network Large campus networks and Data center, is preferred.
• Need to be proficient in English and local language in countries like Switzerland, Germany, Austria, Slovenia, China and Japan

Our client is a leading IT Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy